|
|
Build Your Online Product Catalogs?
| Product Name: |
castings dope
|
| Supply Ability: |
|
| Related proudcts |
|
| Specifications |
ISO9001-2000 |
| Price Term: |
|
| Port of loading: |
|
| Minimum Order |
|
| Unit Price: |
|
|
The quality of the castings is mainly depending on its dope.
Water as the carrier,the heat-resistant casting dope is non-toxic, tasteless, non-polluting and well anti-penetration , and would form a high-intensity surface on the foam. the dope has good suspension capability,and can by dried in the natural air or in the drying room under 45-55℃
Use scope: the mould surface of EPS (lost foam casting) or EPMMA, improving the mould intensity and prevent the casting from emerging defects.
Use method: apply to the method of brushing paint and dip-brushing paint, paint of the mould required drying immediately, the hotter section required painting at least 2~3 times. Drying temperature is 45-55 degrees, the time is about 12 hours, the best drying conditions is ventilation or can be dried in the natural environment, cast when the coat dries completely.
Performance : exterior color : light red (black) ; density:1.3-1.8g/cm3; suspension rate : ¡Ý98% (24 hours); intensity : ¡Ý1.5***; thickness: 0.8-2.0mm; appearance: even coating without impurities or crackles.
Storage : half a year, plastic barrel with air-proof lid , 70kg /barrel
Notes:
1, Mixing the dope evenly before using it.
2 , Sealed and preserved. |
| Company: |
shandong jinyang Machinery Manufacturing Co.,LTD
|
| Contact: |
Ms. fu lijuan |
| Address: |
zouping |
| Postcode: |
255602 |
| Tel: |
86-159-54344535 |
| Fax: |
86-543-2100456 |
| E-mail: |
|
|
|
|
Home
